Pontoons
Modular pontoons for jetskis, boats and swim platforms
A modular pontoon is built from 50 × 50 cm HDPE floats — pontoon cubes that lock together into any shape without special tools. A complete 2 × 4 m jetski dock costs €1,920.00 net, a single float €49.50. We deliver across Europe from Rotterdam.
Prices in the open
Every item with a price — no “on request”. You know where you stand before you talk to us.
Configurator, not guesswork
Enter length and width, get the parts list and total instantly. Nothing gets forgotten.
Experts since 2017
We have worked with watersport equipment since 2017 and test what we sell. Pontoons included.
HDPE, UV-stable, 5-year warranty
High molecular weight HDPE, saltwater resistant, maintenance-free. SGS tested.
What is the pontoon for?
Three uses, three layouts. The configurator calculates all of them.
Jetski dock
The jetski drives onto the dock under its own power and sits dry. No algae, no crane, no cover.
Boat dock
A floating boat mooring for motorboats and sloops up to 4 × 10 m. With U-shaped floats and rollers to guide the hull in.
Swim platform
A rectangular floating surface for lake, river or harbour — swim island, floating platform or bathing jetty. Extendable with railing and ladder.
All prices exclude freight from Rotterdam. We quote freight with your offer. Prices as per our price list of 01/10/2026. Prices may change. Before you buy, get a current, binding quote via the configurator or an enquiry.
Calculate your pontoon in 20 seconds
Enter length and width and get the full parts list — floats, coupling pins, bolts and washers — together with the price. No sign-up, no cookies.
Open configurator →Frequently asked questions
A single HDPE float costs €49.50 net and covers 0.25 m². A complete 2 × 4 m jetski dock costs €1,920.00 net including all coupling pins, bolts and assembly tools. Boat docks start at €4,242.70 net for 3 × 6 m. Freight from Rotterdam is additional.
Four. One float measures 50 × 50 cm, so four of them make exactly one square metre of pontoon surface. A 4 × 3 metre pontoon therefore needs 48 floats. The configurator works this out together with all connecting parts automatically.
High molecular weight HDPE (HMWHDPE), a UV-stable, saltwater-resistant plastic. Such a plastic pontoon is maintenance-free, never needs painting and withstands frost. Floats are SGS tested and the material carries a five-year warranty.
The five years cover all supplied materials and components: HDPE, stainless steel and aluminium. The conditions: you use the pontoon as intended, stay within the permitted load, assemble, connect and anchor it properly, maintain it, and make no modifications or repairs of your own. Not covered are overloading, mechanical damage, normal wear, faulty assembly or anchoring, exceptional weather or environmental conditions and third-party interference. In a warranty case, the affected component is repaired or replaced.
Yes. The pontoon system is a pure push-fit system: floats connect with coupling pins that you drive in with a mallet and lock with a quarter turn of the pin spanner — both are included in the complete kits. Two people assemble a 2 × 4 m pontoon in roughly two hours. No machinery or special skills required.
In the water, piles with pile guides or ground anchors with anchor brackets hold the pontoon; a jetty is also fixed to the shore with at least two jetty brackets. For a jetty, the manufacturer recommends four piles or two ground anchors. Which option fits depends on water level variation and seabed — we advise on this with your quote.
Across Europe. Goods ship from Rotterdam directly to you while we handle the order and invoice. Freight cost depends on volume and destination and appears in your quote, which is why we do not publish a flat rate. Collection at the warehouse in the Netherlands is also possible.